You are here: Products > MPV-103 / MPV-123 > 
DeutschEnglish

Products

mpv-123_103_.pdf

59 K

MPV-103/MPV-123 10/12 Channel Audio Splitter

MPV-103/MPV-123    10/12 Channel Audio SplitterMPV-103 Specialversion mit Direct-Out on Frontpanel

The alphaton multichannel audio splitters distribute microphone levels and line levels up to +6 dBu, featuring low distortion and very low inertial loss. Principal application of alphaton audio splitters are in sound recording studios, in public address systems and broadcast and television studios and OB applications.

MPV splitters offer optimum high voltage safety. They comply with VDE and IEC regulations and are recommended by European broadcasting companies. 

The transformer with separate faraday shields for each winding isolates and rejects the common-mode noise caused by the noise voltage difference between the cases of the multiple mixers. This eliminates the ground loops which would be caused by the mixer
which terminates the microphone directly. All alphaton splitters feature an optional "Direct-Out" in addition to the isolated outputs to handle phantom power.
Heart of any alphaton multichannel audio splitter are high quality distribution transformers, that feature:

  • low inertial loss
  • very flat frequency response
  • nominal level + 6 dBu, MIC-/LINE-levels
  • isolation voltage primary/secondary 3KVeff
  • excellent common-mode rejection
  • efficient magnetic and faraday shields

alphaton multichannel audio splitters distribute are housed in a 19" standard case, each has 12 (10) inputs, which in turn have three transformer-balanced outputs. Optionally each input channel features a "Direct-Output" (parallel wired) that routes phantom power from the main mixing console to the microphone. The direct-outs are wired to IEC 30/39pin connectors on the rear panel (other connectors, like XLR connectors upon customers request) to feed a multicore cable leading to the main mixing console.

Technical Specifications:

Technical Specifications:

max. level +6 dBu
frequency response 30 ... 20.000 Hz, ± 0,9 dB, RL = 1 kOhm
THD K3 (@30 Hz) < 1,5 %
Turns ratio 1:1+1+1
Impedance ratio 150:150+150+150
Primary source impedance < 150 Ohm
Secondary load impedance > 1 kOhm
Faraday Shielding Mu-Metall, - 60 dB
Isolation voltage 3 kV (primary/secondary); 1,5 kV pri/sec vs. ground/shield
Rejection ratio @ +6dBu k3 30 Hz > 45 dB, 1 kHz > 75 dB
Common mode rejection > 60 dB
Earth binding post (on back)
Housing & Dimensions 19“, 3U, 130 mm Depth